Drilling small holes in the lower side of a garbage can make putting in and talking out bags much easier no suction issues

Drilling Small Holes in the Lower Side of a Garbage Can: The Vacuum Hack You Need

If you’ve ever struggled with taking out a full garbage bag without it getting stuck or creating suction issues, we have a simple solution that will make your life easier. By drilling small holes in the lower side of your garbage can, you can say goodbye to the hassle of fighting against trapped air and suction. In this article, we will explore this brilliant vacuum hack and explain how it works.

Drilling holes in a garbage can may sound counterintuitive to some, but many homeowners have found this hack to be highly effective. These small holes serve as a clever way to equalize the pressure inside and outside the can, preventing suction issues and allowing the garbage bags to slide out effortlessly. The concept is similar to poking a hole in a can of paint to release the vacuum seal and facilitate pouring.

To implement this hack, you only need a few basic tools – a power drill, drill bits, and a garbage can, of course. Start by ensuring the garbage can is clean and dry, as working with a dirty or wet surface may affect the quality of the holes. Choose a drill bit size between 1/8 to 1/4 inch, as larger holes may compromise the structural integrity of the garbage can. Then, carefully drill several holes evenly spaced along the lower side of the can. Aim for around 10-15 holes, depending on the size of your can, to achieve optimal results.

Once you’ve completed the drilling process, test the effectiveness of your modified garbage can. When inserting a new garbage bag, you should notice a significant reduction in resistance, as the holes allow the air to escape easily. This means you won’t have to awkwardly poke and prod the bag to remove trapped air. Similarly, when removing a full bag, you’ll experience a smooth and hassle-free process.

Using this vacuum hack not only makes your garbage routine more efficient but also helps to prevent bags from tearing due to excess trapped air. Additionally, these small holes can serve as an effective way to reduce any unpleasant odors that might get trapped inside the garbage can, as they allow for better air circulation.

While this hack has gained popularity among homeowners, it’s worth mentioning that some garbage cans already come with pre-drilled holes or built-in mechanisms for pressure equalization. So, before taking out your drill, check if your garbage can already features this practical design element.

In conclusion, drilling small holes in the lower side of a garbage can is an ingenious vacuum hack that can make your life easier when it comes to bag insertion and removal. By equalizing the pressure, these holes eliminate suction issues and allow for effortless garbage bag handling. If you’re tired of struggling with trapped air and torn bags, give this simple yet effective hack a try and experience the convenience it offers.

Source: The Kitchn